Product Safety Recall: Garmin® BlueChart g2 and g2 Vision v2009

Product Safety Recall: Garmin® BlueChart g2 and g2 Vision v2009

Posted June 4, 2009 | 09:17 AM in Marine | Permalink
CAYMAN ISLANDS/June 4, 2009/Business Wire – Garmin Ltd. (NASDAQ: GRMN), the global leader in satellite navigation, announced today that the company is conducting a voluntary product safety recall of the 2009 version of its marine cartography data card known as BlueChart® g2 and g2 Vision. The affected data cards have been sold between April 8, 2009 and June 3, 2009.
In certain waters, the data card provides inaccurate indications of the depth of the water. This creates a risk of boats going aground, which could result in damage to the boat and/or personal injury.

While Garmin has only received reports of data cards giving inaccurate depth indications in the waters along the coast of Sweden and Denmark, out of an abundance of caution, Garmin has voluntarily chosen to globally recall all 2009 versions of the BlueChart g2 and g2 Vision cards. Garmin has notified relevant authorities about this issue and is working closely with them. No other products are affected by this recall.
Affected products are the 2009 version of the BlueChart g2 in Garmin proprietary card format, BlueChart g2 in microSD/SD card format and BlueChart g2 Vision in microSD/SD card format. Customers are being advised not to use these data cards for navigation.
Affected customers will be provided with a free replacement BlueChart or BlueChart g2 Vision v2008.5. When the 2009 version has been corrected Garmin intends to make it available free of charge to those customers. For more information on the recall and to determine if their cards are affected and eligible for a free replacement, go to


  1. Dear Chuck and Susan,
    Great Blog. I need to take more time with it than I have today.
    Chuck, frozen ball valve from head to thru hull. Any hope other than haul out?
    Jack Salemi

  2. Jack, I am afraid haul out is in your future. We are going through the exact problem right now and will haul out next week. Some folks have been successful putting some heat to the valve with a blow torch but you must be very careful. If you are not comfortable, don't do it. Good luck, Chuck


Note: Only a member of this blog may post a comment.